In wine coolers with static refrigeration a temperature difference between the lower and upper area is normal. The compressor pumps cold air from above into the wine cooler. Cold air is heavier than warm and it falls down. Therefore is the lower part of the wine fridge the coldest area where to store white wine bottles. The upper area is more temperate and intended to store red wines. The difference in degree is not quantifiable as it depends on the outside temperature, the inside

ATTENTION: The built-in wine cooler must not be completely sealed at the backside. Free space must be available to allow ventilation. The display setting indicates the temperature inside the Wine Cooler, which will never be equal to the display setting, since the internal temperature is altered by many factors: outdoor temperature, how often the door is opened and closed, the position of the wine cellar, corner position, sun, underfloor heating, bottles storage, etc. Set the desired

To avoid malfunctions of the wine cooler in mountain areas or locations where the temperature drops below 0° C, we recommend to purchase a dual zone wine

The wine coolers DO NOT HEAT the outside temperature, but they lower it. If the environment in which is positioned the wine fridge have a lower temperature than set in the fridge, the set temperature will not

The display setting indicates the temperature inside the Wine Cooler, which will never be equal to the display setting, since the internal temperature is altered by many factors: outdoor temperature, how often the door is opened and closed, the position of the wine cellar, corner position, sun, underfloor heating, bottles storage, etc. Set the desired temperature on the display, internal and external probes communicate to the compressor that the cooling has reached about 2° C below the

In Datron's Dual Zone Wine Coolers, the maximum difference between upper and lower zone should not exceed 5° C. SOLUTION: Set the temperature